Danh sách Sản phẩm
BurnerPRO Flame Safeguard BP110UVF/BP230UVF Fireye - Fireye Vietnam
BurnerPRO Flame Safeguard
The BurnerPRO™ provides the proper burner sequencing, ignition and continuous flame monitoring for commercial heating and process equipment firing oil and gas fuels.
Giới thiệu sản phẩm
BurnerPRO Flame Safeguard (BP110UVF/BP230UVF) Control, with integrated flame safeguard and boiler control operation provides simplified operation for single point applications.
The system is designed for use in non-permanent operations that requires burner recycle at least once every 24 hours. Seven SMART LEDs provide current operating status and lockout information in the event of a safety shutdown
ORDERING INFORMATION:
|
Item |
Part Number |
Description |
|
1 |
BP230UV-S1 |
BurnerPRO Single Burner Control, 230VAC 50/60Hz, Series 1 timings, with UV non-self check amplifier |
|
2 |
BP230UVF-S1 |
BurnerPRO Single Burner Control, 230VAC 50/60Hz, Series 1 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
|
3 |
BP230UV-S2 |
BurnerPRO Single Burner Control, 230VAC 50/60Hz, Series 2 timings, with UV non-self check amplifier |
|
4 |
BP230UVF-S2 |
BurnerPRO Single Burner Control, 230VAC 50/60Hz, Series 2 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
|
5 |
BP230UV-S3 |
BurnerPRO Single Burner Control, 230VAC 50/60Hz, Series 3 timings, with UV non-self check amplifier |
|
6 |
BP230UVF-S3 |
BurnerPRO Single Burner Control, 230VAC 50/60Hz, Series 3 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
|
7 |
BP110UV-S1 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 1 timings, with UV non-self check amplifier |
|
8 |
BP110UVF-S1 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 1 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
|
9 |
BP110UV-S2 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 2 timings, with UV non-self check amplifier |
|
10 |
BP110UVF-S2 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 2 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
|
11 |
BP110UV-S3 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 3 timings, with UV non-self check amplifier |
|
12 |
BP110UVF-S3 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 3 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
|
13 |
BP110UV-S6 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 6 timings, with UV non-self check amplifier |
|
14 |
BP110UVF-S6 |
BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 6 timings, with UV non-self check amplifier, IP44 (Recommended for new installations - Contact Factory) |
"F" in the part number field represents Fireye version and it's recommended for new installations
|
BurnerPRO Wiring Base |
|
|
60-2981-1 |
Standard base with terminal block and knockouts, 4.2”L x 4.2”W x 1.22”H |
|
60-2944-1 (for “F” series only) |
Special base with terminal block and knockouts, 4.2”L x 4.2”W x 1.22”H |
|
61-7429-1 |
Grounding wire/leash, 10” length |
SCANNER SELECTION
|
FIREYE P/N |
DESCRIPTION |
BULLETIN |
|
UV90L-1 |
UV scanner, Front and side (90o) lateral view, terminal block hook-up |
SC-108 |
|
UV1AL-3, -6 |
UV scanner, 1/2” NPT connector, front view, 3ft/6ft cable, shielded leads |
SC-108 |
|
4-742-1 |
Replacement UV tube for UV90L-1 |
|
|
UV5-1 |
UV Scanner, front and side viewing, 6.5ft leads |
SC-108 |
