Menu

Danh sách Sản phẩm

Máy đo lực căng, lực nén ESM1500S, ESM1500, ESM750, ESM750S Mark 10 - Mark 10 Vietnam

ESM1500S

ESM1500

ESM750

ESM750S

Giới thiệu sản phẩm

ESM1500S ESM1500 ESM750 ESM750S
1,500 lbF [6.7 kN]   1,500 lbF [6.7 kN]   750 lbF [3.4 kN]   750 lbF [3.4 kN]
14.2 in [360 mm] travel   32 in [813 mm] travel   32 in [813 mm] travel   14.2 in [360 mm] travel

 

Feature Part No. Description
FollowMe™ force-based positioning SF008 Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.
Travel indication SF009 Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.
Computer control SF010

Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). 

This option is not required for MESUR®gauge Plus software.

Programmable travel limits SF011 The stand stops at or cycles between programmable upper and lower travel distances.
Overload protection SF012 Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges.
Auto return SF013 The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.
Cycling / dwell time SF014 Same as auto-return, but programmable up to 99,999 cycles. 
Programmable dwell time at upper and lower limits up to 9,999 seconds.
Independent Up and Down speeds SF016 Individually specify speeds for the up and down directions.
Low speed extension SF017 Extends the standard speed range down to 0.001 in/min (0.02 mm/min).
High speed extension

SF018

SF018-1

ESM1500 / ESM1500S: Extends max speed to 90 in (2,300 mm)/min.

ESM750 / ESM750S: Extends max speed to 60 in (1,525 mm)/min.

Break detection SF019 Crosshead stops at a programmable drop in force.
Loadholding SF020 Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time.
Preload / sample touch SF021 Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications.
Profiles SF022 Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored.
Complete options package

SFCOMP (ESM1500 / ESM750)

SFCOMP-1 (ESM1500S / ESM750S)

Includes all functions listed above. 
Requires a Series 7 or 5 gauge or indicator.

 

Part No. Description
Test Stands
ESM1500LC* Motorized test stand with force sensor / load cell mount, 1,500 lbF, 110V*
ESM1500FG* Motorized test stand with force gauge mount, 1,500 lbF, 110V*
ESM1500SLC* Motorized test stand with force sensor / load cell mount, 1,500 lbF, 110V*
ESM1500SFG* Motorized test stand with force gauge mount, 1,500 lbF, 110V*
ESM750LC* Motorized test stand with force sensor / load cell mount, 750 lbF, 110V*
ESM750FG* Motorized test stand with force gauge mount, 750 lbF, 110V*
ESM750SLC* Motorized test stand with force sensor / load cell mount, 750 lbF, 110V*
ESM750SFG* Motorized test stand with force gauge mount, 750 lbF, 110V*
Optional Hardware
AC1055 Base plate, matrix of threaded holes
AC1054 Base plate, multiple center hole threads
AC1057 Force gauge mounting kit (included w/FG models)
AC1056 Load cell mounting kit (included w/LC models)
AC1065 Load cell hardware kit for ESM1500
AC1074 Remote emergency switch
09-1089-1 Power cord, 110V US (included with US models)
09-1089-2 Power cord, 220V EUR (included with "E" models)
09-1089-3 Power cord, 220V UK (included with "U" models)
09-1089-4 Power cord, 220V AUS (included with "A" models)
ESM303-004 Control panel tabletop mounting kit
Optional Functions
SF008 FollowMe™ force-based dynamic manual positioning
SF009 Travel indication, with USB output, ESM1500 / ESM750
SF009-1 Travel indication, with USB output, ESM1500S / ESM750S
SF010 Computer control via USB
SF011 Programmable travel set points
SF012 Overload protection
SF013 Auto return
SF014 Cycling / dwell time
SF016 Independent up and down speeds
SF017 Extended speed range, low
SF018 Extended speed range, high, ESM1500 / ESM1500S
SF018-1 Extended speed range, high, ESM750 / ESM750S
SF019 Break detection
SF020 Loadholding
SF021 Preload / sample touch
SF022 Profiles
SFCOMP Complete options package, ESM1500 / ESM750
SFCOMP-1 Complete options package, ESM1500S / ESM750S
 

 

  A B
ESM1500LC 51.35
[1304.3]
8.13 - 40.13
[206.4 - 1019.2]
ESM1500SLC 33.89
[860.9]
8.13 - 22.33
[206.4 - 567.1]
ESM750LC 50.85 
[1291.6]
8.13 - 40.13
[206.4 - 1019.2]
ESM750SLC 33.39
[848.1]
8.13 - 22.33
[206.4 - 567.1]

 

   
  A B
ESM1500FG 51.35
[1304.3]
5.25 - 37.25
[133.4 - 946.2]
ESM1500SFG 33.89
[860.9]
5.25 - 19.45 
[133.4 - 494.0]
ESM750FG 50.85 
[1291.6]
5.25 - 37.25
[133.4 - 946.2]
ESM750SFG 33.39
[848.1]
5.25 - 19.45
[133.4 - 494.0]
 

Danh sách Sản phẩm

UA-138576167-1