It’s designed by basing on the method of the Hall Effect. Simple and rapid measure as below:
- Place the steel ball on one side of the sample and the probe on the opposite side
- Move the sample and let the probe to be the tested position
- The steel ball will be drawn by the probe automatically
- The Hall Effect sensor on the probe measures the distance between the probe tip and the steel ball
Advantages:
- Non-destructive measure
- High resolution 7” touching screen
- Dynamic display: measuring value / graph / date / hour / battery life
- Full aluminum frame
- Fast and accurate measurementof the thickness
- Achieving accurate thickness measurementin corners,small radius and some irregular shape.
- Displayreal-time measurement value
- and Min. mode: Automatic captureofthe maximum or minimum value
- Value difference function: Display the value difference between preset value and actual measured value
- “CYCLE” function: Record the Max, Min, Average value & Graph during a predefined time. “Delayed start & Auto-stop” function frees the hands of operator and it’s convenient for large-size sample measuring.
- Alarm function: Programmable, warns the high or low preset value by sound or visual indication
- Password function enables the safety of the calibration data and measuring data.
- Can store 9999 measurement data
Technical characteristics:
- Measure mode: Normal / High accuracy
- Display mode: Real-time / Minimum or Maximum
- Resolution: 0.01mmor001 mm(0.001″ or 0.0001″)
- Display:TFT screendisplays thereal time reading, minimum reading, alarm status and data info
- Outputs:RS-232
- Calibration:Multi-point calibration (up to 13 points)
- Power : DC 8.4V
- Battery:Rechargeablelithium battery. Full loaded working time without charging is approx 2-3 hours.
- Units:mm / Inch
- Language: English
- Dimensions: 210 x 150 x 65 mm
- Net weight:2 kg (Package weight: 5 kg)
- Measure range and accuracy (Custom made for range 0-8 mm)
Steel Ball Dia.
|
Thickness upper limit
|
Accuracy
|
4.76mm
|
6.35mm
|
1% ±0.003
|
3.18mm
|
4.57mm
|
2%
|
1.59mm
|
2.29mm
|
3%
|
Standard configuration:
- Standard probe with cable and stand
- Using manual
- Charger
- Steel balls* and supports
- Foot switch
- Portable case
- Calibration blocks*
* Steel balls included: 1.59 / 3.18 / 4.76 mm
* Calibration blocks included: 0.23 / 0.5 / 1 / 2 / 3 / 4 / 5 mm (Custom-made thickness of block is available)